Description
Yamaha 200 HP Tiller Outboard Motor – Four-Stroke
Explore this Yamaha outboard motor from 175 Container Partners. The 2.8-liter F200 combines four-cylinder power with hydraulic assistance at the tiller for deep-V fishing boats. Standard and eight-inch tiller lengths accommodate different layouts. Published features include a 25-inch shaft, 568-pound weight, 50-amp alternator, Yamaha gray finish and 89-octane fuel requirement.
Stock / Model References
| Stock / model code | Configuration |
|---|---|
| F200XHA | 25" / Tiller (electric start & power tilt) / Gray |
Technical Specifications
| Weight † | 258 kg (568 lbs) |
|---|---|
| Full Throttle RPM Range | 5000 – 6000 RPM |
| Fuel Induction System | EFI |
| Recommended Engine Oil | Yamalube® 4M (See owner’s manual) |
| Engine Type | Inline 4 |
| Displacement | 2.8L |
| Bore x Stroke | 96 x 96.2mm (3.78 x 3.79in) |
| Prop Shaft Horsepower | 200hp @ 5500 rpm |
| Alternator Output at W.O.T. | 50 Amp |
| Compression Ratio | 10.3:1 |
| Recommended Fuel | Octane 89 |
| Recommended Fuel Filtration | Yamaha 10 Micron Fuel/Water Separating Filter (external) |
| C.A.R.B. Rating | 3-Star |
| Exhaust | Through Propeller |
| Intake | 16-valve |
| Ignition | |
| Spark Plug | NGK-LFR6A-11 |
| Starting System | Electric |
| Lubrication | Wet Sump |
| Engine Oil Capacity | 4.5L/4.3L w/without filter |
| Recommended Cooling | Thermostatic Control |
| Ethanol Blend Limit | 10% Maximum |
| Gear Ratio | 1.86:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Shaft Length | 25″ |
| Degree of Tilt | 70° |
| Degree of Trim | -4° through +16° |
| Mounting Centers | 26″ |
| Steering | Steering Assisted Tiller Handle |
| Steering Angle (maximum) | 30° from center, either direction |
| Warranty | Limited 3 Year Limited Pleasure Boat – 1 Year Limited Commercial |
Specifications describe the Yamaha model family; equipment and weight can vary by the selected stock/model code. Manufacturer warranty specifications are subject to applicable eligibility and terms. Contact 175 Container Partners for configuration and rigging requirements.





Reviews
There are no reviews yet.