Description
Yamaha 60 HP Outboard Jet Motor – Shallow-Water Jet Drive
Explore this Yamaha outboard motor from 175 Container Partners. The F60 jet-drive motor combines a 1-liter SOHC inline-four with a single throttle valve and long-track induction. Its 60 HP engine delivers 40 HP at the pump, providing a propeller-free option for shallow water. Listed features include 257-pound weight with pump, 25-inch transom fit, 17-amp charging and Power Trim & Tilt.
Stock / Model References
| Stock / model code | Configuration |
|---|---|
| F60JC | 25" / Remote Mech (electric start & power tilt) / Gray |
Technical Specifications
| Weight † | 116kg (257 lbs) |
|---|---|
| Full Throttle RPM Range | 5000 ~ 6000 rpm |
| Fuel Induction System | EFI |
| Recommended Engine Oil | Yamalube® 4-M (See Owner’s Manual) |
| Engine Type | Inline 4 |
| Displacement | 1.0L |
| Bore x Stroke | 65mm x 75mm (2.56 x 2.95 in) |
| Prop Shaft Horsepower | 40hp @ 5500rpm |
| Alternator Output at W.O.T. | 17 Amp |
| Compression Ratio | 9.5:1 |
| Recommended Fuel | Octane 87 |
| Recommended Fuel Filtration | Yamaha 10-Micron Fuel/Water Separating Filter (external) |
| C.A.R.B. Rating | 3-Star |
| Exhaust | Through Jet Nozzle |
| Intake | 8 |
| Ignition | TCI Microcomputer |
| Spark Plug | DPR6EB-9 |
| Starting System | Electric |
| Lubrication | Wet Sump |
| Engine Oil Capacity | 2.1L/1.9.L |
| Recommended Cooling | Thermostatic Control |
| Ethanol Blend Limit | 10% Maximum |
| Gear Ratio | Direct Drive |
| Gear Shift | Forward, Neutral, Reverse |
| Shaft Length | Fits 25″ Transom |
| Degree of Tilt | 69° |
| Degree of Trim | -4 through 16° |
| Mounting Centers | N/A |
| Steering | |
| Steering Angle (maximum) | 40° from center, either direction |
| Warranty | Limited 3 Year Limited Pleasure Boat – 1 Year Limited Commercial |
Specifications describe the Yamaha model family; equipment and weight can vary by the selected stock/model code. Manufacturer warranty specifications are subject to applicable eligibility and terms. Contact 175 Container Partners for configuration and rigging requirements.





Reviews
There are no reviews yet.