Description
Yamaha 75 HP Outboard Motor – Four-Stroke
Explore this Yamaha outboard motor from 175 Container Partners. The 1.8-liter F75 inline-four uses a compact SOHC layout with four valves per cylinder. Compared with the preceding design, the published platform increases displacement while reducing weight by 13 pounds. It weighs 353 pounds and includes a 20-inch shaft and 35-amp alternator, with compatible tiller or mechanical controls and optional gauge-based trolling RPM.
Stock / Model References
| Stock / model code | Configuration |
|---|---|
| F75LB | 20" / Remote Mech (electric start & power tilt) / Gray |
Technical Specifications
| Weight † | 160 kg (353 lbs) |
|---|---|
| Full Throttle RPM Range | 5000 ~ 6000 rpm |
| Fuel Induction System | EFI |
| Recommended Engine Oil | Yamalube® 4M (See owner’s manual) |
| Engine Type | Inline 4 |
| Displacement | 1.8L |
| Bore x Stroke | 81 x 88.9mm (3.19 x 3.5in) |
| Prop Shaft Horsepower | 75hp at 5500 rpm |
| Alternator Output at W.O.T. | 35 Amp |
| Compression Ratio | 10.0:1 |
| Recommended Fuel | Octane 87 |
| Recommended Fuel Filtration | Yamaha 10-Micron Fuel/Water Separating Filter (external) |
| C.A.R.B. Rating | 3-Star |
| Exhaust | Through Propeller |
| Intake | 16 |
| Ignition | TCI Microcomputer |
| Spark Plug | LFR6A-11 |
| Starting System | Electric |
| Lubrication | Wet Sump |
| Engine Oil Capacity | 3.2/3.0L |
| Recommended Cooling | Thermostatic Control |
| Ethanol Blend Limit | 10% Maximum |
| Gear Ratio | 2.15:1 |
| Gear Shift | Forward, Neutral, Reverse |
| Shaft Length | 20″ |
| Degree of Tilt | 70° |
| Degree of Trim | -4° through +16° |
| Mounting Centers | N/A |
| Steering | |
| Steering Angle (maximum) | 35° from center, either direction |
| Warranty | Limited 3-year Pleasure, 3-year Government, 1-Year Commercial |
Specifications describe the Yamaha model family; equipment and weight can vary by the selected stock/model code. Manufacturer warranty specifications are subject to applicable eligibility and terms. Contact 175 Container Partners for configuration and rigging requirements.





Reviews
There are no reviews yet.