Description
Yamaha 90 HP Outboard Jet Motor – Shallow-Water Jet Drive
Explore this Yamaha outboard motor from 175 Container Partners. The F90 jet engine uses a 1.8-liter SOHC inline-four, long-track induction and Yamaha YDC-30 aluminum alloy. The 90 HP engine delivers 65 HP at the pump for shallow-water use. Published specifications include a 354-pound weight with pump, 25-inch transom fit, 35-amp alternator and Power Trim & Tilt.
Stock / Model References
| Stock / model code | Configuration |
|---|---|
| F90JB | 25" / Remote Mech (electric start & power tilt) / Gray |
Technical Specifications
| Weight † | 161kg (354 lbs) |
|---|---|
| Full Throttle RPM Range | 5000 ~ 6000 rpm |
| Fuel Induction System | EFI |
| Recommended Engine Oil | Yamalube® 4M (See owner’s manual) |
| Engine Type | Inline 4 |
| Displacement | 1.8L |
| Bore x Stroke | 81mm x 88.9mm (3.19 x 3.5 in) |
| Prop Shaft Horsepower | 65hp @ 5500rpm |
| Alternator Output at W.O.T. | 35 Amp |
| Compression Ratio | 10.0:1 |
| Recommended Fuel | Octane 87 |
| Recommended Fuel Filtration | Yamaha 10-Micron Fuel/Water Separating Filter (external) |
| C.A.R.B. Rating | 3-Star |
| Exhaust | Through Jet Nozzle |
| Intake | 16 |
| Ignition | TCI Microcomputer |
| Spark Plug | LFR5A-11 |
| Starting System | Electric |
| Lubrication | Wet Sump |
| Engine Oil Capacity | 3.2L/3.0L |
| Recommended Cooling | Thermostatic Control |
| Ethanol Blend Limit | 10% Maximum |
| Gear Ratio | Direct Drive |
| Gear Shift | Forward, Neutral, Reverse |
| Shaft Length | Fits 25″ Transom |
| Degree of Tilt | 70° |
| Degree of Trim | -4 through 16° |
| Mounting Centers | N/A |
| Steering | |
| Steering Angle (maximum) | 35° from center, either direction |
| Warranty | Limited 3 Year Limited Pleasure Boat – 1 Year Limited Commercial |
Specifications describe the Yamaha model family; equipment and weight can vary by the selected stock/model code. Manufacturer warranty specifications are subject to applicable eligibility and terms. Contact 175 Container Partners for configuration and rigging requirements.





Reviews
There are no reviews yet.